The UK's Number One Scissor Lift Table Supplier
The Bishamon EZ Loader is a self-levelling pallet positioner that automatically keeps the top of the load at a constant working height as items are added or removed. No electric supply needed – it runs on compressed air. The 1092mm rotating platform turns 360°, so operators stay in one position throughout loading. Self-levelling capacity 113kg to 1588kg. EN1570 compliant and CE marked.
Most pallet loading injuries happen because the operator bends to reach the bottom of a pallet, or stretches to reach across it. The EZ Loader removes both problems. As items are taken off, the platform rises automatically to keep the top of the load at a consistent working height. As weight is added, it lowers. The operator never needs to bend or stretch. No button to press, no manual adjustment. It just adjusts.
The system runs on compressed air – connect to a standard compressed air line (compressor not included), set the three-position pressure knob to match the pallet weight (light, medium, or heavy), and the unit maintains height throughout the loading cycle. Pressure is infinitely fine-tunable between 10 and 60 psi by adding or bleeding air. No springs to change, no mechanical adjustment required.
There are no power cables and no connection to a fixed supply point. The unit is freestanding and portable – move it between workstations with a forklift using the optional fork pockets, or keep it permanently at one location.
The 1092mm diameter rotating platform turns a full 360° on a ball-bearing centre pivot. The operator works from one standing position throughout without walking around the pallet. Safety finger guards are fitted under the rotator ring as standard. A platform brake is available as an optional extra to lock rotation when needed.
CE marked, EN1570 compliant. European Declaration of Conformity and full operating instructions supplied with every unit.
Please note: this product is made to order and cannot be cancelled once ordered. As it’s made to your specification, it’s excluded from our standard returns policy unless it arrives damaged or faulty. Call us on 01932 872348 if you’d like to talk it through before ordering.
Automatic Scissor Lift
Air Pressure
Maximum Load Capacity
1814kg
Minimum Self Levelling Capacity
113kg
Maximum Self Levelling Capacity
1588kg
Raised Height
775mm
Closed Height
267mm
Rotating Platform Diameter
1092mm
Base Length
1092mm
Base Width
617mm
Maximum Internal Air Pressure
135 psi (9.3 bar)
Price is inclusive of delivery to UK mainland. Delivery to Scotland may be subject to additional charges. Goods shall be delivered to site within 7 working days for in-stock items, but we’re often faster than this. Free standard delivery is via the pallet network and will require offload facilities on site. Any special arrangements for offload will incur additional charges.
Delivery is to a business address Monday to Friday 8.30am to 5.00pm. Restricted delivery areas or residential addresses may incur a surcharge.
Please note delivery times are an estimate and for accurate lead times, please contact us using the ‘Contact Us’ section in the next tab.
The unit runs on compressed air rather than mechanical springs or an electric motor. The air pressure supports the load and automatically adjusts as weight changes – so as items are removed from a pallet the platform rises, and as items are added it lowers, keeping the top of the load at a consistent working height throughout.
No. It connects to a standard compressed air supply. No power cables, no motor, no fixed electrical connection required. The compressor is not included.
The unit self-levels between 113kg and 1588kg. The maximum static load capacity is 1814kg.
A three-position knob on the unit selects light, medium, or heavy. From there, pressure can be fine-tuned infinitely between 10 and 60 psi by adding or bleeding air – no spring changes or mechanical adjustment needed.
Yes. The unit is freestanding with no fixed installation. Fork pockets are available as an optional extra for moving the unit by forklift between stations.
The standard rotating platform is 1092mm in diameter. A square 1200 x 1200mm platform is available as an optional extra for larger pallet sizes.
Yes – a full 360° on a ball-bearing centre pivot, allowing the operator to work from one standing position without walking around the pallet. A platform brake is available as an optional extra to lock rotation when needed.
PVC bellow skirts, square platform (1200 x 1200mm), mobile base frame, fork pockets, squaring stops, and a stainless steel or galvanised finish.
Protects the table from dust, dirt and debris in exposed environments and to reduces the risk of injury or entrapment
Upgrade to a larger square platform of 1200mm x 1200mm for larger pallet sizes
Stabilises the platform when stationary and prevents the ring from rotating
For easier manoeuvrability where the pallet positioner is used in multiple locations regularly
How can we help you? Send us your questions online
Sorry, no reviews match your current selections