The UK's Number One Scissor Lift Table Supplier
The SC-500-DE reaches 1900mm in 30 seconds — battery electric, no manual pumping. 500kg capacity, 840 x 1350mm platform, 12v traction battery and charger included. UK manufactured and EN1570 compliant.
The double scissor mechanism exists for one reason: to reach heights a single scissor can’t. The SC-500-DE gets to 1900mm — 300mm higher than most imported electric double scissor alternatives at this capacity — and does it in 30 seconds without a foot pump in sight.
It’s the unit for elevated conveyor feeds, mezzanine-level positioning, and above-head assembly work where both the height and the throughput matter. 500kg capacity on an 840 x 1350mm platform, 490mm closed height. Battery and charger included, no mains required on site.
The double scissor configuration raises the closed height to 490mm compared to a single scissor’s 360mm — worth factoring in if low loading height is a constraint. Everything else carries the full heavy duty specification: EN1570 and BS:5323:1980 certified, EN60529 electrical compliance, cut-off bar and emergency stop standard.
UK manufactured. 12-month warranty. Free delivery to mainland UK.
Hydraulic Lift Table Operation
Battery Operated / Electric
Load Capacity
500kg
Lift Height
1900mm
Lowest Height
490mm
Platform Length
1350mm
Platform Width
840mm
Handle Height
1040mm
Wheel Diameter
150/200mm
Lift Time to Full Height
30 Seconds
Weight
352kg
Price is inclusive of delivery to UK mainland. Delivery to Scotland may be subject to additional charges. Goods shall be delivered to site within 21 working days for in-stock items, but we are often faster than this. Free standard delivery is via the pallet network and will require offload facilities on site. Any special arrangements for offload will incur additional charges.
Delivery is to a business address Monday to Friday 8.30am to 5.00pm. Restricted delivery areas or residential addresses may incur a surcharge.
Please note delivery times are an estimate and for accurate lead times, please contact us using the ‘Contact Us’ section in the next tab.
30 seconds from closed to 1900mm. Battery electric — remote push button, no manual pumping required.
The SC-500-DE reaches 1900mm. Most imported electric double scissor tables at 500kg reach around 1600mm. That 300mm difference is relevant when positioning loads onto raised conveyors, elevated benches, or mezzanine-level surfaces.
Yes. A 12v traction battery and safe design plug-in charger are included as standard.
Emergency stop switch, safety cut-off bar under the platform, overload valve, slow lowering valve, and total stop brake on the castor wheel. All standard — not optional extras.
Fitted to the underside of the platform, it detects obstructions during lowering and stops the table automatically. Standard on all electric heavy duty models.
Beyond lift height, the SC-500-DE is certified to EN1570 and BS:5323:1980 — dual compliance most imported units don’t carry. Electrical contacts and motors conform to EN1570/EN60529. Safety features are standard throughout.
Available extras include a second braked wheel, stainless steel top cover, ball top, bellows safety skirt, rubber mat, and a steel zinc plated roller conveyor top. The roller conveyor top increases closed and raised height by 60mm.
Yes. Every unit is issued with a test certificate in conformance with EN1570 and BS:5323:1980. Electrical contacts and motors also conform to EN60529.
Front fixed castors are replaced with swivel castors to allow for maximum mobility. The front castors are two directional locking, proving complete flexibility depending on application. Perfect when working within confined, space restricted areas.
This increases the lead time of stocked items by approximately 20 working days.
Fitted to the underside of the platform preventing access to the scissor lift mechanism on all 4 sides. Also helps protect the hydraulic lift mechanism and other components when used in dusty environments.
This increases the lead time of stocked items by approximately 20 working days.
Ensure safe lifting of larger goods by increasing the standard platform size from 840 x 1350mm to 1000 x 1350mm.
This increases the lead time of stocked items by approximately 20 working days.
Ball transfer units spaced equally allows the operator to easily transfer goods on and off the scissor table in all directions. Supplied with ‘drop in stops’ to secure the load when required – approx 74mm in height.
This increases the lead time of stocked items by approximately 20 working days.
Allows the operator to easily transfer goods on and off the lift table (down the length of the table). Increases closed/raised height by 60mm. Supplied with ‘drop in stops’ to secure the load when required.
This increases the lead time of stocked items by approximately 20 working days.
For extra stability when stationary, an additional braked castor prevents the scissor lift table from moving when loading and unloading.
This increases the lead time of stocked items by approximately 20 working days.
How can we help you? Send us your questions online
Sorry, no reviews match your current selections