The UK's Number One Scissor Lift Table Supplier
The SC-1000-SM carries a tonne on a 1000 x 2000mm platform — the largest platform in the heavy duty manual range. Built in Britain for industrial use, with an 1050mm working height and 80 pumps to full lift.
Some loads won’t fit a standard platform. Long components, large fabrications, oversized assemblies — a table with an 840mm platform simply isn’t the right tool. The SC-1000-SM is built for those jobs. Its 1000 x 2000mm platform is the largest in the heavy duty manual range, giving you a full two metres of load-bearing surface without losing any of the lift height or build quality the range is known for.
At 1050mm raised height and 360mm closed, it handles the same working height as the 800kg and 1250kg models in the range. The difference is what it can carry across that surface — and how much room the operator has to position, adjust, and unload without the load overhanging the edge.
It’s manufactured in Britain to EN1570 and BS:5323:1980 standards, and issued with a test certificate and operating instructions. The heavy duty arm, bearings, and hydraulics are built for repeated industrial use rather than light handling. An overload valve and slow lowering valve are fitted as standard. The total stop brake on the castor wheel prevents movement during loading and unloading — a standard feature here, not an extra.
The lift-up lid gives safe access for maintenance in the closed position without the need to raise the platform, and nylon bushes are fitted at all arm end hinge points to reduce wear at the points of highest load.
Hydraulic Lift Table Operation
Manual / Foot Pump
Load Capacity
1000kg
Lift Height
1050mm
Lowest Height
360mm
Platform Length
2000mm
Platform Width
1000mm
Handle Height
1040mm
Wheel Diameter
150/200mm
Pumps to Full Height
80 Pumps
Weight
350kg
Price is inclusive of delivery to UK mainland. Delivery to Scotland may be subject to additional charges. Goods shall be delivered to site within 7 working days for in-stock items, but we are often faster than this. Free standard delivery is via the pallet network and will require offload facilities on site. Any special arrangements for offload will incur additional charges.
Delivery is to a business address Monday to Friday 8.30am to 5.00pm. Restricted delivery areas or residential addresses may incur a surcharge.
Please note delivery times are an estimate and for accurate lead times, please contact us using the ‘Contact Us’ section in the next tab.
The SC-1000-SM has a 1000 x 2000mm platform compared to the 840 x 1350mm on the 800kg and 1250kg units. It’s the right choice when the load footprint is larger than a standard platform can accommodate — long components, oversized fabrications, or loads that would overhang a smaller table.
Raised height is 1050mm and closed height is 360mm — the same as the 800kg and 1250kg single scissor models. The difference is platform area, not working height.
One of the castor wheels is fitted with a total stop brake as standard. This locks the table in place during loading and unloading, preventing it from moving under load. It’s a standard fitting on every unit in this range, not an optional extra.
The heavy duty range features a unique lift-up lid that allows safe maintenance access in the closed position without needing to raise the platform. This is a design feature specific to this range and not found on lighter duty imported alternatives.
Imported tables at this capacity typically offer lower lift heights, lighter duty construction, and fewer safety features as standard. The SC-1000-SM is built to EN1570 and BS:5323:1980 — a dual compliance standard that most imported units don’t carry. The overload valve, slow lowering valve, total stop brake, and nylon arm bushes are all standard here. On imported units, several of these are either optional or absent.
Available extras include a second braked wheel, stainless steel top cover, ball top, bellows safety skirt, rubber mat, and a steel zinc plated roller conveyor top. Note: the roller conveyor top increases closed and raised height by 60mm.
The SC-1000-SM is UK manufactured. Contact us for current lead time and delivery information. Free delivery to mainland UK addresses.
Yes. Every unit in this range is issued with a test certificate in conformance with EN1570 and BS:5323:1980, along with full operating instructions.
Front fixed castors are replaced with swivel castors to allow for maximum mobility. The front castors are two directional locking, proving complete flexibility depending on application. Perfect when working within confined, space restricted areas.
This increases the lead time of stocked items by approximately 20 working days.
Fitted to the underside of the platform preventing access to the scissor lift mechanism on all 4 sides. Also helps protect the hydraulic lift mechanism and other components when used in dusty environments.
This increases the lead time of stocked items by approximately 20 working days.
Ball transfer units spaced equally allows the operator to easily transfer goods on and off the scissor table in all directions. Supplied with ‘drop in stops’ to secure the load when required – approx 74mm in height.
This increases the lead time of stocked items by approximately 20 working days.
Allows the operator to easily transfer goods on and off the lift table (down the length of the table). Increases closed/raised height by 60mm. Supplied with ‘drop in stops’ to secure the load when required.
This increases the lead time of stocked items by approximately 20 working days.
For extra stability when stationary, an additional braked castor prevents the scissor lift table from moving when loading and unloading.
This increases the lead time of stocked items by approximately 20 working days.
How can we help you? Send us your questions online
Sorry, no reviews match your current selections