The UK's Number One Scissor Lift Table Supplier
This small electric hydraulic scissor lift table is a straightforward, low-cost solution for lifting loads to a working height of 780mm. Available in 500kg or 1000kg capacity, it runs on 3-phase power and is operated from a handheld control pad. The platform measures 950 x 600mm, with a lowest height of 180mm. UK manufactured, EN1570 compliant, 3-year warranty.
Our small hydraulic scissor lift table is a practical, low-cost solution for lifting goods to a convenient working height. The platform is operated from a handheld control pad – press to raise, press to lower. Simple to use, with no special training required.
It runs on a heavy-duty single scissor mechanism, rated to 500kg or 1000kg depending on the model. Maximum lift height is 780mm, with a lowest platform height of 180mm – giving a useful working range without taking up much floor space. The 500kg model reaches full height in 8 seconds; the 1000kg in 14 seconds. The platform is 950 x 600mm, which suits small, heavy components in engineering, production, and manufacturing settings where space is limited.
A safety trip bar runs along the underside edge of the platform. If anything obstructs the lowering movement, the platform stops. The scissor mechanism also has maintenance safety stops, which hold the platform up during servicing so nobody is working under a suspended load.
The table can be surface mounted or installed within a pit for flush floor-level loading if required. Optional extras are available – see the Optional Extras tab.
Fully compliant with EN1570. CE marked, supplied with a European Declaration of Conformity and full operating instructions.
Please note: this lift table is made to order and cannot be cancelled once ordered. As it’s made to your specification, it’s excluded from our standard returns policy unless it arrives damaged or faulty. Call us on 01932 872348 if you’d like to talk it through before ordering.
Hydraulic Scissor Lift
Electric
Load Capacity
500kg / 1000kg
Lift Height
780mm
Lift Stroke
600mm
Lowest Height
180mm
Platform Length
950mm
Platform Width
600mm
Motor
0.8kW
Lifting Time to Full Height
8 seconds / 14 seconds
Power
3ph
Price is inclusive of delivery to UK mainland. Delivery to Scotland may be subject to additional charges. Goods shall be delivered to site within 21 working days for in-stock items, but we are often faster than this. Free standard delivery is via the pallet network and will require offload facilities on site. Any special arrangements for offload will incur additional charges.
Delivery is to a business address Monday to Friday 8.30am to 5.00pm. Restricted delivery areas or residential addresses may incur a surcharge.
Please note delivery times are an estimate and for accurate lead times, please contact us using the ‘Contact Us’ section in the next tab.
Two options: 500kg and 1000kg. Choose whichever suits your application – the rest of the specification is the same across both models.
780mm, with a lift stroke of 600mm. The platform sits at 180mm when fully lowered.
3-phase, with a 0.8kW motor. If you’re unsure whether your site has 3-phase available, your electrician or facilities manager will be able to confirm.
The 500kg model reaches full height in around 8 seconds. The 1000kg model takes around 14 seconds.
950 x 600mm. Designed for compact, heavy loads in workshops and production environments where a larger table wouldn’t fit.
Yes. The table can be set into a pit so the platform sits flush with the floor when lowered, which makes loading from ground level straightforward.
Yes. Every unit is supplied with a CE Declaration of Conformity, full operating instructions, and a test certificate. It conforms to EN1570.
Bellow safety skirts, roller platforms, side barrier rails, a bogie frame to make it mobile, loading flap, circular and rectangular turntables, hinged swing gate, mechanical shot bolts, and an automatic height control system. See the Optional Extras tab for details.
Protects the table from dust, dirt and debris in exposed environments. The lift table can be enclosed in a chain mesh curtain to reduce the risk of injury or entrapment.
Roller platform or another conveyor type is often utilised in production systems where different levels need to be reached.
Side barrier rails with a mid-rail and a toe kick-plate is a recommended option when the lift table is used as a goods lift between levels.
Provided with wheels the lift platform becomes a mobile.
For bridging the gap between the lift table and loading dock or vehicle. Manually operated. This option is mainly used on lorry loaders.
The circular turntable is a great accessory to add to your lift table as it makes the handling of an object much easier and ergonomic. With the circular turntable, the operator rarely has to move as it is possible to rotate an object 360 degrees. The circular turntable can also be delivered as recessed into a secondary table top, which is fitted and levelled to the main scissor lift platform.
It is usually combined with the barrier rails and supplied with mechanical locks.
Secure a platform that can be lowered below floor level. When the platform is secured to the ground it can take heavy loads and even be run over by other vehicles.
Fitted on the lift table top and rectangular surface bolted to the main scissor lift platform. The unit has safety spacing and electro-interlocked to the lift travel to reduce the risk of trapping an operator.
Automatic lifting and lowering of the lift table.
How can we help you? Send us your questions online
Sorry, no reviews match your current selections